Hot Rolled is a low carbon steel suitable for normal forming and bending operations for shelving and light structural sections. Grade/250 structural steel with a guarantee minimum yield strength of 250 MPA for structural sections, light poles, guard rails. Grade/350 structural steel with a guaranteed minimum yield strength of 350 MPA, for structural sections racking and truck chassis

Hot Rolled Sheet and Coil

Grades: Standard Commercial Grade
Standard Widths: 915,1200,1500
Standard Thickness: 1.60mm to 3.00mm
Standard Length: 1830,2440,3000

Cut to length, slitting and guillotining to size available

Hot Rolled Plate and Coil

Grades: Standard commercial grades are available, other grades upon request
Standard Widths: 915mm, 1220mm, 1500mm
Standard Thickness: 4.00mm to 20mm
Standard Length: 1830, 2440, 3000

Cut to length, slitting and guillotining to size available

Hot Rolled Floor Plate

Grades: Standard Commercial Grades
Standard Widths: 1220, 1500
Standard Thickness: 3.00mm to 5.00mm
Standard Length: 2460

Hot Rolled Pickled and Oiled Sheet and Coil

Is a formable steel suitable for moderate pressing and drawing, ideal for automotive parts, agricultural machinery, furniture, brackets, switch boards and heater components.

Grades: Standard commercial grades are available, other grades upon request
Standard Width: 915mm, 1220mm, 1500mm
Thickness: 1.60 to 8.00mm
Standard Lengths: 1830, 2440, 3000

Cut to length, slitting and guillotining to size available

[ PRINT THIS PAGE ]