Call to chat to our team Find your
nearest location
Building Products

Steel Fascia (& Cover)

Steel Fascia
Steel Fascia

Product available in: Vic, Sa, Qld

The Apex Steel Fascia System offers clean lines and serves as a smart alternative for new homes.

Constructed from Hi-Tensile ZINCALUME® and pre-painted COLORBOND® steel, it is resistant to warping, shrinking, or rotting, ensuring virtually maintenance-free performance.

This fascia can be easily integrated with most gutter profiles using our spring clip system, allowing for quick installation and simple adjustments to falls.

 

MAXIMUM SUPPORT SPACING
*Steel sheet roofing – 1200mm
*Tile roofing – 600mm

 

FASCIA COVER:

The Fascia profile is also offered as a Fascia Cover. A Fascia Cover is a protective and decorative board that attaches to the exposed ends of timber or the top edge of exterior walls.

It conceals the fascia—the horizontal band running along the roofline—providing a polished appearance while safeguarding the underlying structure from the elements.

Enquire about Product

  • More Info

ADVERSE CONDITIONS
If material is to be used within 1km of salt marine, industrial or corrosive environments please contact our Apex sales staff.

WARRANTIES
Our products are supported by Bluescope Steel Limited and a full warranty is available.

LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.

HANDLING
Care should be taken at all times when handling Apclad Hi-ten. Packs must be kept dry and stored above ground level, should the sheets become wet separate immediately and individually wipe and place in an area to dry.

COMPATIBILITY
ZINCALUME® steel sheeting is compatible with most roofing products. It is NOT recommended to use lead flashing/nails, copper or copper alloy materials with or in run-off situations.

CUTTING
Apex Building Products provides this service, however sheets may be cut using a power saw with a metal cutting blade. COLORBOND® steel sheeting must be cut with the coloured surface facing the ground. Ensure that no hot particles or debris come into contact with the COLORBOND® .

CLEAN UP
To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nails, rivets, rags and all cutting or drilling filings.

WALKING
Clean soft soled shoes should be worn when walking on sheets.

DELIVERY
Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangements to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.